stradela 1, Sihastrului 19 or. Codru, mun. Chişinău

Tel.: +373 69 13 73 60; Fax: +373 22 28 26 42; Email: convendalux@mail.ru

stradela 1, Sihastrului 19 or. Codru, mun. Chişinău

Tel.: +373 69 13 73 60; Fax: +373 22 28 26 42; Email: convendalux@mail.ru

Security seal Sprut-4

Sprut 4 - This indicator seal, which is made for sealing a wide range of stationary objects of nature - containers, tanks, warehouses, safes, meters, gauges, facilities, etc.

Product specifications:

- In the production of fillings such as Sprut-4 uses high-quality plastic, as well as politkarbonat or polypropylene. Each material may be provided in a wide range of colors.
- All the elements of the seal are produced by molding and filling is a connecting jumper.
- Housing seal consists of a special box, which is assembled from two identical elements, as well as - catch.
- The dimensions of the device in the unassembled (inactive) state - 10x0,2x0.6 see.
- Assembled (working) a device Sprut has a rectangular shape in the width of 0.2 cm
- The device is lightweight (approximately 3 grams) without cable.
- Increased resistance to temperature. The seal works perfectly in temperatures from -40 to +60 degrees Celsius.
- Devices can be stored for 5 years from date of manufacture.
- Re-installation is not possible. The seal becomes incapacitated at the opening.
- On the seal can be applied to a seven-digit number, as well as logos and emblems by laser marking.
- The design of the seal used a steel wire with a diameter of less than 1 mm or a cable made of galvanized steel. The standard cable length is 2.5. On request, this length can be increased. The cable is not included in the Reel, and is available in assembled form the coils.

Setting seals:

1) Align the two housing parts, until the housing clicks.
2) The free part of the cable factory in eye object that needs to be sealed. Then you need to put each end of the cable into the oval passage Sealed up the case.
3) Both ends of the cable you need to pull the back of the body, and then insert the latch down until it clicks.
4) To verify the success of installation of the seal can try on their own to open the seal. If the seal has been installed correctly, you will not be able to open it, without special tools.