stradela 1, Sihastrului 19 or. Codru, mun. Chişinău

Tel.: +373 69 13 73 60; Fax: +373 22 28 26 42; Email: convendalux@mail.ru

stradela 1, Sihastrului 19 or. Codru, mun. Chişinău

Tel.: +373 69 13 73 60; Fax: +373 22 28 26 42; Email: convendalux@mail.ru

Security seal Sprut-6

Seal model Sprut 6 provides protection against unauthorized access to a variety of objects, tools and products. This seal is ideal for electrical cabinets, measuring devices, safes, doors, freight containers and other objects to which access must be restricted. Special Feature Sprut 6 is a monolithic body that provides absolute protection against tampering, which could be noticed. Also, the model Sprut 6 has a large field for the application of information, which makes it an ideal device for a seal marking the stored goods.

Features Sprut 6:

- Seal easily resists extreme temperatures, as well as the different climatic features.
- Increased temperature resistance (-50 ° to + 90 °).
- Thermoplastic enclosure. Environmentally friendly material.
- Robust polystyrene core. Easy to steer the core without damage to the structure of the seal.
- Seals 7 colors.
- On the seal can be applied to a seven-digit code, so that the number of sealed devices or goods are not repeated.
- Easy installation mechanism that does not require special skills in technical areas.
- Solid connection between the housing and seals the core. Cable seals can not be removed without damaging the core of the device. You will always know that there were attempts to make unauthorized access to your property.
- Ability to apply logos and drawings.
- Polystyrene body predisposed to laser marking and stamping.
- Cable seals made of thin galvanized steel.
- Practical storage devices, the method in plastic packs of 50 pieces each.

Types of marking:

1) This can be applied to a special information platform
2) This can be applied to an information platform and a housing seal
3) This can be applied to an information platform and core seals
4) This may be applied, including at the end of the rotating core.

As you are installing a seal?

1) One end of the cable must be inserted into the opening of the subject on which you want to install the seal.
2) The free part of the cable is inserted into the opening in the seal body.
3) You must then manually tighten the rope as long as the loop between the seal and sealable object will not be more than 0.5 cm.
4) Locking produced four full turns of the core in a clockwise direction.