stradela 1, Sihastrului 19 or. Codru, mun. Chişinău

Tel.: +373 69 13 73 60; Fax: +373 22 28 26 42; Email: convendalux@mail.ru

stradela 1, Sihastrului 19 or. Codru, mun. Chişinău

Tel.: +373 69 13 73 60; Fax: +373 22 28 26 42; Email: convendalux@mail.ru

Security seal Sprut-5

Locking sealing device Sprut 5 is used to monitor the safety of stationary objects, safes and doors in the room, electrical cabinets, a variety of technical equipment, as well as containers, which are stored and transported goods and cargo. This type of seal has high protection against external sources and versatility.

The main difference between models Sprut 5 from other devices in the series is the presence of a special ring-pad, which is soldered to the housing seal during sealing. This method creates a monolithic core protection seals completely dismissing any possibility of opening the device without your knowledge.

Features delay Sprut 5:

- High resistance to temperature extremes, low or high humidity and other climatic features.
- Seal withstands high temperature minima and maxima (from -50 to +90 degrees Celsius)
- The housing seals made of thermoplastic material over the quality, manufactured from non-toxic and environmentally friendly materials.
- Polystyrene core has high strength and is easy to use. The core is able to easily rotates around an axis, and it is difficult to break if used incorrectly.
- 7 core colors (red, blue, green, yellow, etc.).
- On the seal can be applied to the code of 7 digits, which is very convenient, especially if you need labeling, which are represented in large numbers.
- Seal provides for the possibility of drawing the company - emblem or logo. Polystyrene surface without any problem can be subjected to laser marking or embossing.
- Protection against reuse. The core of the seal does not rotate, and open the seal no longer operates.
- Cable for seals made from a thin and durable galvanized steel.
- The process of installing the seal - a quick and simple operation, which is easy to learn.
- Seals are packed in suitable containers and can be stored for many years.

The method of installation of a seal

- To establish a seal, it is necessary to measure the required length of cable. To do this, we must remember that in the installed seals, cable ends should extend at least 1 centimeter.
- Openings on the housing and the core need to combine the core turning clockwise. Then you need to insert one end of the wire into the hole and make a one and a half turn clockwise.
- Then you need to invest the remaining end of the wire into the second hole.
- Locking devices occurs when you make 4 total turnover of the core.
- For full installation of the seal is necessary to break off the box color insert.
- If you have the skills to install the seal, you can just insert both ends of the rope and reel them onto the core.